What to do if Acson WM07G Air Conditioner will not be used for a long time?
To prepare your Acson Air Conditioner for an extended period of non-use, operate the unit for 2 hours in cool mode at 30°C/86°F. Additionally, remove the power plug, cut off the independent electric circuit (if applicable), and take out the batteries from the remote control.
General| Brand | Acson |
|---|---|
| Model | WM07G |
| Category | Air Conditioner |
| Language | English |
Visual guide for outdoor unit placement and clearance requirements.
Steps for securing the mounting plate, drilling holes, and attaching the unit.
Guidance on how to route refrigerant piping from the indoor unit.
Proper connection of the drain pipe for effective water removal.
Recommendations for optimal pipe length and elevation to maintain system efficiency.
Best practices and precautions for handling and preparing refrigerant pipes.
Instructions for properly connecting refrigerant pipes to indoor and outdoor units.
Guidelines for electrical wiring specific to cooling-only units.
Guidelines for electrical wiring specific to heat pump units.
Procedure for evacuating and charging the refrigerant system.
Details on Dry, Heat, Hot Keep, and Multi-Split operating modes.
Information on airflow control, fan speed, overheating protection, and frost prevention.
Specifies the temperature ranges for optimal unit operation.
Description of the electrostatic filter for air purification.
Description of the deodorizing filter for odor removal.
Instructions for installing the unit with the O₂ therapy feature.
To Next Page
