ACT Quantum Q4 - Stacking

710-00002.5
11
11
are 3/8” (10mm) diameter. Use 5/16” x 4” bolts or larger bolts that are suitable for use with the
installation surface.
Stacking
For floor mounting, chargers can be stacked to maximize area utilization. For Stacking, only use
mounting brackets especially designed for the Quantum Charger Series, available from your local
ACT Dealer.
NOTE:
When Stacking unit follow the Maximum number of stacked units
provided in the following table
Q4
Q6
Q12
Maximum Number of
Stacked units
3
2
2