Installation Guide
15
8. Insert the sealing nut into the conduit gland body and then attach the clamping nut as tightly
as possible to complete the cable solution.
9. If connecting other devices, attach the terminal blocks to the cables. Refer to the sections
below for detailed information:
How to Connect a Power Adapter (Optional) on page 27
How to Connect DI/DO Devices (Optional) on page 29
How to Connect Audio Devices (Optional) on page 32
10. Connect the network cable to the Ethernet port and other cables (if any) to the corresponding
connectors on the camera.
11. Proceed with Step 6: Install the Camera on page 16.
Digital Input / Output
(DI/DO) Connector
Audio Input / Output
Connector
To Next Page
Loading...
