ACTi B81 - Network Connectivity; Accessing Camera Live View; Web Browser Access and Login

www.acti.com
Installation Guide
17
Step 7: Connect to Network
Connect the other end of the network cable to a switch or injector. Then, connect the switch or
injector to a network or PC and a power source. See Power-over-Ethernet (PoE) example
connection diagram below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
In case of using a non-PoE switch, power up the camera using a power adapter (not supplied). As
needed, power up the other connected devices.
Step 8: Access the Camera Live View
See How to Access the Camera Live View on page 20 for more information.