Hardware Manual
19
Using the Waterproof Tape
Regardless of the shape of the camera cable connector, the simplest way to waterproof to
connection is by using the waterproof tape.
Connect an Ethernet cable from the network side to the Ethernet port of the camera and wrap
the connection with waterproof tape to complete the installation.
NOTES on using Ethernet cables: For outdoor installations, it is recommended to use
exterior-grade Ethernet cables (CAT5/CAT5e/CAT6); ordinary Ethernet cables are only
designed for indoor use and may deteriorate quickly when exposed to outdoor elements.
Exterior-grade Ethernet cables are waterproof and do not require a conduit.
To Next Page
Loading...
