Actia ACT553 - General Settings Configuration

USER MANUAL - DUAL ZONE AUDIO MEDIA PLAYER EQUIPMENT ACT553 - ACT553/DAB+
480305-3.0 11/12/2019 Page 23 / 33
© ACTIA “Any reproduction of this document, even partial, is strictly forbidden without written authorisation”.
POL. IND. “LOS OLIVOS”
C/ CALIDAD, 66
28906 GETAFE
Tel: +34 91 665 26 26
Fax: +34 91 665 23 24
N.I.F. ES-A-28905065
9. Audio Settings (Any Source)
From any source:
1. Press and hold [VOLUME] (or [SEL] on the remote control) to enter the menu.
2. Press [VOLUME] repeatedly or [SEL] on the remote control), to select the desired parameter.
3. Turn the [VOLUME] knob (or press [VOLUME] keys on the remote control) to select the value of
a parameter. Refer to Table 5.
4. If no operation is selected for a few seconds, the equipment will automatically return to the main
screen.
Table 5 – Audio Settings
PARAMETER
VALUE
DESCRIPTION
BALANCE
-15 to +15
Adjust the output balance of the left and right speakers.
BASS
-15 to +15
Adjust the gain of the bass frequency range.
MIDDLE
-15 to +15
Adjust the gain of the middle frequency range.
TREBLE
-15 to +15
Adjust the gain of the treble frequency range.
EQUALIZER
ROCK – OPERA – POP
VOICE – FLAT
Select between different pre-defined equalization profiles.

Note!
When selecting a pre-defined equalization profile, the BASS, MIDDLE and TREBLE parameters
change depending on the profile.