Actia ACT553 - Maintenance Procedures; Equipment Cleaning; SD;USB Port Care

USER MANUAL - DUAL ZONE AUDIO MEDIA PLAYER EQUIPMENT ACT553 - ACT553/DAB+
480305-3.0 11/12/2019 Page 24 / 33
© ACTIA “Any reproduction of this document, even partial, is strictly forbidden without written authorisation”.
POL. IND. “LOS OLIVOS”
C/ CALIDAD, 66
28906 GETAFE
Tel: +34 91 665 26 26
Fax: +34 91 665 23 24
N.I.F. ES-A-28905065
10. General Settings
To access the general settings menu of the equipment:
1. Press and hold [b] to access the general settings menu.
2. Press repeatedly [VOLUME] (or [SEL] on the remote control), to select the desired parameter.
3. Turn the [VOLUME] knob (or press the [VOLUME] keys on the remote control) to adjust the
value of a parameter. Refer to Table 6.
4. If no operation is selected for a few seconds, the equipment will automatically return to the main
screen.
Table 6 – General Settings
PARAMETER
VALUE
DESCRIPTION
Stby AV Bypass
ON
(default value)
With the equipment off. Redirection of the auxiliary input to
the passenger auxiliary output activated.
OFF
With the equipment off. Redirection of the auxiliary input to
the passenger auxiliary output deactivated.
Guide MIC Zone
DRV + PSG
(default value)
The guide microphone is heard in driver and passenger
areas.
PSG
The guide microphone is only heard in the passenger area.
Radio Mode
Session
Radio AM/FM/DAB+ source settings are not saved in
memory. Each time the vehicle is set to OFF, they will be
reset to factory settings.
Permanent
Radio AM/FM/DAB+ source settings are saved in
memory. The configuration is kept even if the vehicle is
set to OFF.
Hands Free Mode
FL
Hands-free audio will only be heard through the left
speaker in the driver area (Front Left).
FL + FR
Hands-free audio will be heard through the speakers in
the driver area (Front Left and Front Right).
FR
Hands-free audio will only be heard through the right
speaker in the driver area (Front Right).