27
Chapter 2 Setting Up the Gateway
In the next window, select the ISP being used from the list box on the left
(scroll down for more choices), then click Next. A series of informational
screens will display while the Gateway searches for the connection. If the con-
nection is successful, go to step 2. If not, go to “Manual Setup,” below.
Manual Setup - If the Auto Detect and Select from a list are not successful, or
the user knows how to configure VPI/VCI and Encapsulation settings, click in
the “Manual Setup” box, then click Next.
To Next Page
Loading...
Need help?
General
