ActionTec GT704-WG - Remote Syslog Capture; Wireless Settings

54
Actiontec 54 Mbps Wireless DSL Gateway User Manual
55
Chapter 4 Using Advanced Setup
Remote Syslog Capture
Selecting Remote Syslog Capture in the “Configuring the Advanced Settings” screen
generates the “Remote Syslog Capture” screen. In this screen, the user can configure
the Gateway to allow a remote computer to access the Gateway’s system logs.
Wireless Settings
To access the Gateway’s wireless configuration screens, select Wireless Settings
from the menu on the left side of the “Set Up/Configuration” screen.
This generates the “Wireless Settings” screen.