61
Viewing the
Gateway’s Status
After configuring the Gateway, settings can be viewed by selecting Status in the
Web Configurator’s Main Menu. In the menu on the left side, there are other
Status options available: Routing Table, ARP Table, WAN Status, LAN Status,
and Active User List.
No settings (other than connecting or disconnecting from the Internet) can be
changed from the Current Status screen.
General Status
After configuring the Gateway, settings can be viewed by selecting Status in
the Main Menu. The “General Status” screen appears, displaying many of the
Gateway’s settings. No settings (other than connecting or disconnecting from the
Internet by clicking on Connect or Disconnect) can be changed from the General
Status screen.
Firmware Version
Displays the firmware version the Gateway is currently running.
MAC Address
Displays the MAC (Media Access Control) address of the Gateway.
5
To Next Page
Loading...
