59
Chapter 4 Using Advanced Setup
Wireless Advanced Settings
Selecting Wireless Advanced Settings in the “Wireless Settings” screen generates
the “Wireless Advanced Settings” screen.
SSID Broadcast
To prevent unknown users from associating with the Gateway’s network (by using
“ANY” as an SSID, for example), disable the Gateway’s SSID broadcast by clicking in
the circle next to “Disable.”
802.11b/g Mode
Access to the Gateway’s network can be restricted to wireless clients using either
the 802.11b or 802.11g wireless adapters. Click on the down arrow next to the text
box and select the desired option. Actiontec recommends using the “Mixed” mode
(the default option), which enables both 802.11b and 802.11g wireless clients to
join the network.
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
To Next Page
Loading...
Need help?
General
