57
Chapter 4 Using Advanced Setup
256-bit WEP - 256-bit WEP requires one or more keys, each key comprising 29
hexadecimal pairs. A hexadecimal digit consists of alphanumeric characters rang-
ing from 0-9 or A-F. To create a 256-bit WEP key, activate Key 1 by clicking in the
appropriate circle, then enter 29 hexadecimal digit pairs in the Key text box. After
activating 256-bit WEP on the Gateway, a computer with wireless capability can
join the network only if this key is entered in the computer’s wireless encryption
scheme.
☞
Note: Not all wireless PC Cards support 128- or 256-bit WEP.
Ensure that all PC Cards installed in the networked computers
support 128- or 256-bit WEP before activating.
WEP+802.1x
Activating WEP+802.1x in the Wireless Settings screen generates the “Wireless
802.1x Security Settings” screen. This setting is for enterprise networks only, and
should be accessed by an experienced information systems specialist.
To set up WEP+802.1x security, enter the IP address of the RADIUS server in the
“Server IP Address” text box, and the “Secret” key (for communication between
the RADIUS server and the Gateway) in the “Secret” text box. The “Port” and
“Group Key Interval” values should remain the same
WPA
Activating WPA (Wi-Fi Protected Access) in the Wireless Settings screen generates
the “Wireless WPA Settings” screen.
To Next Page
Loading...
Need help?
General
