USB over Network
e Receiver’s USB over Network (UoIP) feature allows the use of USB
HID peripheral devices, either from the source device or from the USB
device side. To connect a USB keyboard, mouse, or trackpad:
1. Plug the device into the Receiver’s USB port and wait for the device to
be detected. is may take 10-15 seconds.
2. Use the USB keyboard, mouse, or trackpad to control the device.
Restore to Default
To restore the Receiver’s default factory settings:
1. Aer the Receiver is powered on, wait until the “Ready to Connect”
screen is displayed on the HDTV.
2. Hold down the Receiver’s “Reset” button.
3. When the “Restore to Default” screen appears on the HDTV, release
the “Reset” button.
When the Receiver reboots, it will be running with its default settings.
Display and Control Options
15
To Next Page
Loading...
