Getting Started
Introduction
Congratulations on your purchase of a ScreenBeam Pro Wireless Display
Receiver. e Receiver lets you wirelessly transmit what’s on your
compatible Intel WiDi, Windows 8.1+, or Miracast™ wireless display-
capable device, and displays it on your HDTV.
is user manual will take you through the procedures needed to
connect, congure, and operate the Receiver, and also describe a few
dierent possible scenarios concerning setup locations.
Package Contents
• ScreenBeam Pro Wireless Display Receiver (1)
• Power Adapter (1)
• HDMI® Cable (1)
• Product documentation
System Requirements
Receiver
To connect the Receiver, you must have the following items:
• An HDTV monitor with one free HDMI port
• An available power outlet
3
To Next Page
Loading...
