ActionTec ScreenBeam SBWD100A User Manual

8
Connecting to ScreenBeam
4. When the screen shown below appears, get the ScreenBeam USB
Transmitter and insert it into a USB drive on the laptop/PC. Click Next.
5. Click in the button next to “Yes, I want to restart my laptop/PC now,” then
click Finish.
The laptop/PC reboots. After it finishes rebooting, go on to the next section,
“Pairing the USB Transmitter and Display Receiver.”

ActionTec ScreenBeam SBWD100A Specifications

General

Brand	ActionTec
Model	ScreenBeam SBWD100A
Category	Monitor
Language	English