Declaration of Conformity for Products Marked with
the FCC logo or Industry Canada (IC)– North
America Only
is device complies with Part 15 of the FCC Rules and with Industry
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
1. is device may not cause harmful interference;
2. is device must accept any interference received, including
interference that may cause undesired operation of the device.
Important Note on Wi-Fi
If applicable, this equipment complies with FCC/Industry Canada
radiation exposure limits set forth for an uncontrolled environment.
e radio has been found to be compliant to the requirements set forth in
CFR 47 Sections 2.1091, 15.247 (b) (4),15.407 addressing RF Exposure
from radio frequency devices as dened in Evaluating Compliance with
FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields. e equipment should be installed more than 30
cm (~12 in.) from your body or nearby persons.
For product available in the USA/Canada market, only channel 1~11 can
be operated. Selection of other channels is not possible.
e device could automatically discontinue transmission in case of
absence of information to transmit, or operational failure. Note that this
is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the
technology.
e device for the band 5150-5250 MHz is only for indoor usage to
reduce potential for harmful interference to co-channel mobile satellite
systems.
To Next Page
Loading...
Need help?
General
