Back Panel
• Power port: used to connect the power adapter (external, 12V DC, 2A,
made by Actiontec, model #WA-24Q12FU) to the Extender.
• Reset button: restores the Extender back to the original factory default
settings when held down for at least 10 seconds.
• Coax port: used for connecting the Extender to a coaxial network,
using Bonded MoCA 2.0.
• Dual-port Gigabit Ethernet switch: used for directly connecting the
Extender to the gateway/modem.
• Labels: indicate the factory default GUI access username and
password, network SSID names, and security keys.
To Next Page
Loading...
