Active DST Module - DST-2-C
Page 13© 2016 Active Research Limited
Compatible Transducer List
This compatibility list is by no means exhaustive - more
transducer types and manufacturers are added every
month after their compatibility has been proven.
Airmar Technology are always expanding and improving
their transducer range. Any of the 200kHz model types will
work well with the Actisense DST-2-C-200 module, and
likewise, any of the 235kHz model types will work well with
the Actisense DST-2-C-235 module.
Airmar do not currently make any 150kHz transducers.
The 150kHz DST-2 model has been successfully tested
with the EchoPilot Marine and NASA Marine transducers.
Seafarer transducers are essentially the same as the NASA
model, so should be identical in performance, though this
is yet to be proven conclusively.
Actisense would like personal feedback of any company
using the DST-2 module with a different manufacturer and/
or model type of transducer not included in this list. This
feedback will help greatly to expand this list.
Manufacturer Model Ceramic type
For use with Actisense DST-2-C-150
Echopilot Marine Standard in-hull stemmed, with oil bath mounting 150 kHz / 30mm circular element
NASA Marine Standard in-hull stemmed, with oil bath mounting 150 kHz / 30mm circular element
For use with Actisense DST-2-C-200
Airmar (*1)
D800 & DT800 through-hull retractable,
with P17, B17 or B122 skin-tting
All 200kHz models
Airmar (*1)
DST800 through-hull retractable,
with P17 or B17 skin-tting
All 200kHz models
Airmar (*1)
P52 & P66 transom mount multisensor &
P79 adjustable in-hull depth
200kHz-G
Airmar (*1)
P19 & B22 through-hull low prole &
P39 transom mount multisensor
200kHz-U
Airmar (*1)
P23 transom mount depth/temp,
P319 through-hull low prole, &
P32 transom mount multisensor
200kHz-A
Airmar (*1) B39, B45 & B46 through-hull stemmed All 200kHz models
Airmar (*1) B744V & B744VL through-hull multisensor All 200kHz models
Airmar (*1) SS44V, B66V & B66VL multisensor All 200kHz models
Airmar (*1) SS505 & SS555 through-hull stemmed All 200kHz models
Skipper ETN200FS & ETN200F in-hull depth All 200kHz models
VDO Modis 120 200kHz
Table 4 – Transducer compatibility list
Note:
1. Airmar skin-tting types: P - Plastic, B - Bronze, SS - Stainless Steel
To Next Page
Loading...