Activinsights GENEActiv User Manual

11
LED ACTION CONDITIONS SIGNAL
Constant red In plugged-in USB cradle Communicating with software
Repeated flashing red In plugged-in USB cradle Charging
Repeated flashing green In plugged-in USB cradle Charged
Single long green flash Not in cradle, button start mode Recording started by button press
Single long red flash Not in cradle, button configured as active Recording stopped by button press
Single quick green flash
Not in cradle, not recording, following a
button press
Charged
Single quick red flash
Not in cradle, not recording, following a
button press
Needs charging
LED signals
Section 2 About GENEActiv
Flashing = charged Constant = communicating
Flashing = charging
Long flash in ‘Button Start’ mode
= recording started
Short flash when un-configured
= battery good
Long flash in ‘Button Active’ mode
= recording stopped
Short flash when un-configured
= battery needs charging

Activinsights GENEActiv Specifications

General

Brand	Activinsights
Model	GENEActiv
Category	Measuring Instruments
Language	English