24
© Copyright ActSafe Systems AB
USAGE
Operation in water
If neutral buoyancy is required at a depth less
than 6.5 meters, let air out to make it neutrally
buoyant. Likewise if buoyancy is needed at a
depth greater than 6.5 meters, add some air.
It is not necessary to let the air out when
approaching the surface; the buoyancy aid
can withstand the increased pressure at
surface level.
RECOMMENDATION
Ensure the watertight cap is mounted over
the connector and that the Schrader valve is
closed. If the inside of the ascender is lled with
water the battery can generate ammable gas.
Ascenders that are used for diving shall
undergo regular tightness tests. Preferably
prior to each operation.
DANGER
To Next Page
Loading...
