Open the trunk.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Testthelightstomakesurethe
new bulb is working.
Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.
Remove the fastener on the edge
of the trunk opening by turning it
counterclockwise with a coin.
Unscrew the cargo net mounting
button. Pull the lining back.
Determine which of the four bulbs
is burned out: stop/taillight, stop/
tail/side marker light, back-up
light, or turn signal.
Remove the socket by turning it
one-quarter turn counterclockwise.
1.
3.
2.
4.
5.
6.
7.
Replacing Rear Bulbs
Lights
Maintenance
278
FFAASSTTEENNEERR
CCAARRGGOO NNEETT
MMOOUUNNTTIINNGG
BBUUTTTTOONN
０２／０１／０９ １４：３６：４９ ３１Ｓ３Ｍ６２０ ０２８１
To Next Page
Loading...
