Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Reinstall the socket. Turn it
clockwise until it locks.
Testthelightstomakesurethe
new bulb is working.
Put the fastener in the hole on the
side of the trunk lining and push
on the center until it locks (the
center is flush with the head).
Screw the cargo net mounting
button back into the hole.
Remove the burned-out bulb by
pulling it straight out of the socket.
Install the new bulb in the socket.
1.
2.
8.
9.
3.
4.
Replacing a High-mount Brake
Light Bulb
Lights
Maintenance
279
０２／０１／０９ １４：３６：５８ ３１Ｓ３Ｍ６２０ ０２８２
To Next Page
Loading...
