185
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Put the transmission into (P.
2. Apply the parking brake.
3. Press a memory button ((1, (2, or (3).
u You will hear the beeper, and the
indicator light will blink.
The seat, the steering wheel
*1
and the door
mirrors
*1
will automatically move to the
memorized positions. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
*1: Driver’s seat only
■
Recalling the Stored Position
1Recalling the Stored Position
The seat, the steering wheel
*1
and the door mirrors
*1
will stop moving if you:
• Press the SET button or memory button (1, (2, or
(3.
• Adjust the seat position, door mirrors
*1
, or steering
wheel
*1
.
• Put the transmission into a position other than (P.
• Press the mode selector up or down.
Models with mode selector
22 ACURA MDX-31TYA6000_02.book 185 ページ 2020年11月5日 木曜日 午前11時39分