uuMaintenance Minder
TM
uTo Use Maintenance Minder
TM
594
Reset the maintenance minder information display if you have performed the
maintenance service.
1. Set the power mode to ON.
2. Press the right selector wheel until the content is displayed.
3. Roll the right selector wheel until the Maintenance screen is displayed.
4. Press and hold the right selector wheel for about 10 seconds to enter the reset
mode.
5. Roll the right selector wheel to select a maintenance item to reset, or to select All
due items (You can also press the right selector wheel to the left to end the
process).
6. Press the right selector wheel to reset the selected item.
7. Repeat from step 4 for other items you wish to reset.
■
Resetting the Display
Failure to reset the Maintenance Minder
TM
after a
maintenance service results in the system showing
incorrect maintenance intervals, which can lead to
serious mechanical problems.
The dealer will reset the Maintenance Minder
TM
display after completing the required maintenance
service. If someone other than a dealer performs
maintenance service, reset the Maintenance
Minder
TM
display yourself.
You can also reset the Maintenance Minder
TM
display
using the audio/information screen.
2 Customized Features P. 345
Remaining Engine Oil Life
Maintenance Service Items
Right Selector Wheel
22 ACURA MDX-31TYA6000_02.book 594 ページ ２０２０年１１月５日 木曜日 午前１１時３９分
To Next Page
Loading...
Need help?
General
