581
uuSurround View Camera System
*
uDisplaying an Image From the Surround View Cameras
Continued
Displaying an Image From the Surround View
Cameras
■
For frontal views:
Press the CAMERA button when the vehicle is
stationary or moving at 12 mph (20 km/h) or
slower. Press the button again to switch
camera views.
■
For rear reviews:
Change the shift position to (R when the
vehicle is stationary. Press the CAMERA
button to switch to rear view mode.
You can customize the display setting.
2 Customized Features P. 351
1Surround View Camera System
*
The surround view camera system does not eliminate
all blind spots. The system is for your convenience only.
If the rear camera lens is covered with dirt or moisture,
activate the rearview camera washer or use a soft,
moist cloth to keep the lens clean and free of debris.
2 Rear Wiper/Washers P. 183
When the parking sensor system detects any
obstacles, the indicator will display.
2 Parking Sensor System
*
P. 570
When a vehicle is detected approaching from a rear
corner, Cross Traffic Monitor alerts you.
2 Cross Traffic Monitor P. 574
1Displaying an Image From the Surround View Cameras
The navigation system is disabled when the shift
position is in
(R.
Pressing the (home) or (back) button while
the surround view camera system screen is displayed
cancels the front view screen of the surround view
camera system.
If you press the CAMERA button while the vehicle
speed is more than 16 mph (25 km/h), the standby
screen appears.
When the vehicle speed is reduced below 12 mph (20
km/h), the screen switches to a surround view camera
system image.
* Not available on all models
24 ACURA MDX-31TYA6200.book 581 ページ ２０２３年３月２日 木曜日 午後１２時４４分
To Next Page
Loading...
Need help?
General
