Audio System
Operating the Radio
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pressing the ON/OFF
button. The radio comes on and
displays the frequency of the station
it was last tuned to.
The power antenna will also extend.
Adjust the volume with the VOL dial
(outside ring of the left knob).
Select the AM or FM band by
pushing the AM/FM button. The
selected band is shown next to the
frequency display.
Comfort and Convenience Features
AM/FM BUTTON
BAND DISPLAY
To Next Page
Loading...
