Audio System
The REPLAY, SKIP and SCAN
functions use silent periods on the
tape to find the end of a selection.
These features may not work satis-
factorily on tapes that have almost
no gap between songs, a high noise
level between songs, or silent peri-
ods in the middle of songs.
Caring for the Cassette Player
The cassette drive picks up dirt and
oxides whenever you play a tape.
This builds up over time and causes
the sound quality to degrade. To
prevent this, you should clean the
cassette drive after every 30 hours of
use. Your dealer has a cleaning kit
available for this purpose.
After 50 hours of use, the CLEAN
light comes on to remind you to
clean the cassette drive. After clean-
ing the drive, turn off the CLEAN
light by pushing it in with the tip of a
ballpoint pen or similar object.
If you do not clean the cassette
player regularly, it may eventually
become impossible to remove the
contamination with a normal
cleaning kit.
Use 100-minute or shorter cassettes.
Cassettes longer than that use
thinner tape that may break or jam
the drive.
Comfort and Convenience Features
CLEAN LIGHT
To Next Page
Loading...
Need help?
General
