Indicator Lights
Seat Belt Reminder Light
This indicator flashes for several
seconds when you turn the ignition
ON (II). It flashes as a reminder to
you and your passenger to fasten the
seat belts. A beeper also sounds if
you have not fastened your seat belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page 255.
Charging System
Indicator
If this light comes on when the
engine is running, the battery is not
being charged. For complete
information, see page 256.
Parking Brake and
Brake System Indicator
This light has two functions:
1. It lights as a reminder that you
have not released the parking
brake. Driving with the parking
brake applied can damage the
brakes and tires, and cause the
Anti-lock brake system to turn off
(see page 157).
2. If it remains lit after you release
the parking brake while the engine
is running, or comes on while
driving, it can indicate that the
brake fluid level is low. This is
normally due to worn brake pads.
Have your dealer check the
braking system for worn pads or
fluid leaks.
Instruments and Controls
U.S.
Canada
BRAKE
To Next Page
Loading...
Need help?
General
