255
uuBluetooth® HandsFreeLink®uPairing a Phone
Continued
Bluetooth® HandsFreeLink®
Pairing a Phone
H PHONE button
When no Bluetooth®-compatible phone is paired, the following screen appears:
1. Rotate to select Yes. Press .
2. Make sure your phone is in search
or discoverable mode. Press .
u HFL automatically searches for
a Bluetooth® device.
3. When your phone appears on the
list, select it by pressing .
u If your phone does not appear,
you can select Refresh to
search again.
u If your phone still does not
appear, move to select
Device Not Found? and
search for Bluetooth® devices
using your phone. From your
phone, select HandsFreeLink.
1 Pairing a Phone
Your Bluetooth®-compatible phone must be paired
to HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:
• You cannot pair your phone while the vehicle is
moving.
• Up to six phones can be paired.
• Your phone's battery may drain faster when it is
connected to HFL.
• If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and returns to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
• : The phone can be used with HFL.
• : The phone is compatible with Bluetooth®
Audio.
18 ACURA RDX NAVI-31TX48500.book 255 ページ ２０１７年４月２０日 木曜日 午後１２時４６分
To Next Page
Loading...
Need help?
General
