Acura RDX Navigation Manual

uuMapuColor
74
System Setup
Set the screen brightness separately for Day and Night modes. Press the
(Display Mode) button to cycle through the display modes (Day to Night to Off).
1. Press the (Display Mode)
button.
u The Brightness bar is displayed
for a few seconds.
u Rotate to adjust the
brightness. Press .
2. Press the (Display Mode)
button again.
u Repeat the procedure to switch
the display modes.
■
Switching Display Mode Manually
1 Switching Display Mode Manually
A visual guide helps you see the difference between
Day and Night modes.
2 Day or Night Mode P. 10
Illumination Priority Operation
button 1 Selects Day, Night, or Off display mode. This
button has the highest priority and overrides all
other display control adjustments listed below.
Remember: Once you press this button, you
assume full manual control of the display mode
until the power mode is set to VEHICLE OFF
(LOCK).
Sunlight sensor (see
your Owner’s
Manual for location)
2 If the sunlight sensor detects daylight and the
headlights are turned on, the system
automatically overrides the Night display and
displays the Day display mode.
Remember: If desired, use the (Display
Mode) button to override this automatic choice.
18 ACURA RDX NAVI-31TX48500.book 74 ページ ２０１７年４月２０日 木曜日 午後１２時４６分

Acura RDX Specifications

General

Brand	Acura
Model	RDX
Category	Automobile
Language	English