75
uuMapuColor
Dash illumination
adjustment knob
(see your Owner’s
Manual for location)
3 When headlights are turned on, and you wish to
have the Day display mode, adjust the
illumination to the full brightness setting (beeps).
Remember: Adjust the dash brightness back to
mid-range to allow auto switching by sensing the
headlights are on or off.
Headlights (Auto/
On/Off)
4 When turned on, the display changes to Night
display mode. The previous three controls listed
above can “cancel” this function.
Remember: Use the (Display Mode)
button, or adjust the dash illumination to full
brightness, to set the display to your desired
choice.
Screen color choice N/A The user can select the color of the screen that
will be displayed for the Day and Night display
modes described above.
Illumination Priority Operation
18 ACURA RDX NAVI-31TX48500.book 75 ページ 2017年4月20日 木曜日 午後12時46分