terminals at CMP Sensor A and the ECM/PCM.
5. Turn the ignition switch OFF.
6. Disconnect the CMP Sensor A 3P connector.
7. Turn the ignition switch ON (II).
8. Measure voltage between CMP Sensor A 3P connector terminal No. 3 and body ground.
Is there battery voltage?
YES: Go to step 9.
NO: Repair open in the wire between the No. 18 ACG (15A) fuse in the under-dash
fuse/rela
box and CMP Sensor A, then
o to step 19 .
2004 Acura TSX
2004 ENGINE PERFORMANCE VTEC/VTC - TSX
Wednesday, March 12, 2008 2:17:58 AM Page 11
To Next Page
Loading...
