Fig. 15: Checking For Continuity Between VTEC Oil Pressure Switch Terminals No. 1 & No.
2
9. Turn the ignition switch ON (II).
10. Measure voltage between VTEC oil pressure switch terminal No. 1 and body ground.
Is there battery voltage?
YES: Repair open in the wire between the VTEC oil pressure switch and G101, then go to
step 13 .
NO: Go to step 11.
2004 Acura TSX
2004 ENGINE PERFORMANCE VTEC/VTC - TSX
Wednesday, March 12, 2008 2:17:58 AM Page 25