Fig. 24: Disconnecting The VTC Oil Control Solenoid Valve Connector
2. Remove the bolt (B) and VTC oil control solenoid valve (C).
3. Check the VTC oil control solenoid valve for sticking and the solenoid valve filter for clogging. If the
valve is stuck or clogged, replace the VTC oil control solenoid valve.
4. Check clearance between the port (advance side) and the valve. Make sure the valve (A) closes full
.
2004 Acura TSX
2004 ENGINE PERFORMANCE VTEC/VTC - TSX
Wednesday, March 12, 2008 2:17:58 AM Page 37