•
WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, ITffi
COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS.
SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.
~
POISON
Care & Maintenance
Display Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Replace Intelli-Time
®
Clock Battery
Intelli-Time
®
technology is powered by a pre-installed coin-cell battery that
stores the time and date settings. The battery has a shelf life of several years.
Time and date will need to be
entered after replacing Intelli-Time
battery. To replace the Intelli-Time
battery:
1. Locate the coin cell battery
compartment door in the
battery compartment of the
display. Unscrew and remove
the compartment cover.
2. Insert 1 x CR2032 coin
cell battery into the battery
compartment, as shown. Install
battery with “+” positive
terminal facing OUT.
3. Screw in the battery cover.
Remove
Battery Cover
1
CR2032
3V
Insert
CR2032
Battery
2
13
To Next Page
Loading...
