•
•
OPERATION
Using the Clock
Set the Alarm Time
Press AND HOLD the “ALARM ON/OFF ” button for 5 seconds to enter
ALARM SET MODE.
To adjust the currently selected (ashing) item, press and release the “
▲
” or
“
▼
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ALARM ON/OFF“ button to
adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for 60
seconds. Enter ALARM SET MODE at any time by pressing and holding the
“ALARM ON/OFF“ button for 5 seconds.
Alarm Clock ON/OFF function
To Turn Alarm on: Press and release the “ALARM ON/OFF” button until the
” “ icon and the words “ALARM ON” appear on the clock
To Turn Alarm off: Press and release the “ALARM ON/OFF” button. The “ “
icon will disappear and the words “ALARM OFF” will appear on the clock.
SNOOZE function
When the alarm is sounding, press the "SNOOZE/LIGHT" button to activate
the SNOOZE function for 8 minutes. There is no limit to the amount of times the
SNOOZE function can be activated.
Momentary Backlight
Press the "SNOOZE/LIGHT" button to activate the momentary backlight for 5
seconds.
7
To Next Page
Loading...
