How to fix incorrect weighing readings on my Adam Equipment QBW?
If your Adam Equipment Scales are showing incorrect weighing readings, it likely needs recalibration. Recalibrate the scales using an external reference mass.
What to do if my Adam Equipment QBW Scales display 'E OL' during weighing?
If your Adam Equipment Scales display 'E OL' during weighing, it means the weighing pan is overloaded. Remove some weight from the pan.
Why are the weighing readings unstable on my Adam Equipment Scales?
Unstable weighing readings on your Adam Equipment Scales are often caused by draughts or vibrations. Make sure the scale is on a firm, vibration-free surface, away from any sources of draught.
How to troubleshoot a blank display on Adam Equipment QBW Scales when pressing the On key without the charger?
A blank display on your Adam Equipment Scales when pressing the On key without the charger usually means the battery is discharged or disconnected. Try plugging in the mains power supply/charger and check the battery connections.
What does 'E Lo' mean on my Adam Equipment Scales display at power up and how to fix it?
If your Adam Equipment Scales display 'E Lo' at power up, it could be due to the weighing pan not being fitted or the load cell being disconnected. Switch off the instrument. Fit the plastic and metal weight pan and switch it on again. Also, check the connections between the load cell and the main board.
What does 'E Hi' mean on my Adam Equipment QBW Scales display at power up?
If the display shows “E Hi” at power up, it means there is a load present on the weight pan. To solve this: * Switch off the instrument. * Remove the load from the weight pan. * Switch it on again.
What to do if my Adam Equipment QBW have a blank display when pressing [On] with the charger connected?
If your Adam Equipment Scales have a blank display when pressing [On] with the charger connected, the internal power cable or the keypad cable may be disconnected. Reconnect the cable from the power supply board to the main board. Reconnect the cable from the keypad to the main board.
What does 'E Or' mean on my Adam Equipment QBW Scales during weighing?
If your Adam Equipment Scales display 'E Or' during weighing, the weight value is too large to be displayed in the currently selected units. Remove some weight from the pan or select alternative units.
Why does the charge LED on my Adam Equipment QBW Scales remain red after charging for hours?
If the charge LED remains red after several hours of charging, it indicates that the battery is faulty. Replace the battery.
Why doesn't the charge LED light up when the charger is plugged into my Adam Equipment QBW Scales?
If the charge LED does not illuminate when the charger is plugged in, there may be no mains supply to the charger. Check the wall socket.
General| Display | LCD |
|---|---|
| Units of Measurement | g, kg, lb, oz |
| Interface | RS-232 |
| Protection Class | IP65 |
| Readability | 1 g - 10 g |
| Calibration | External |
| Operating Temperature | 0°C - 40°C |
| Material | Stainless steel |
To Next Page