Why Adamson A40 does not cool enough?
Your Adamson Air Conditioner might not be cooling enough because the doors or windows are open (ensure they are closed), there are heat sources in the room (remove them if possible), the exhaust air hose is not connected or is blocked (connect or clean it), the temperature setting is too high (reset it), or the air inlet is blocked (clean it).
What does E3 code mean on my Adamson Air Conditioner?
The E3 code on your Adamson Air Conditioner indicates that the water tank is full. To resolve this, drain the water tank using the Bottom Drain Outlet.
Why Adamson Air Conditioner automatically turns off in heating mode?
Your Adamson Air Conditioner may be automatically turning off in heating mode because it has a Heating Protection System. This system turns the power off automatically when the temperature at the air outlet exceeds 70°C. Restart the unit at a sufficiently lower room temperature.
How to fix noisy Adamson A40 Air Conditioner?
If your Adamson Air Conditioner is noisy, first ensure that it is placed on a flat, leveled surface. Also, the flowing refrigerant inside the air conditioner will make some sound, and this is normal for any kind of air conditioner with a compressor.
General| Brand | Adamson |
|---|---|
| Model | A40 |
| Category | Air Conditioner |
| Language | English |
To Next Page