Adamson A40 - Remote Control Advanced Features; Sleep Mode Activation; Temperature Units and Display

Push the "SLEEP" button to turn on sleep mode, push again to turn off sleep mode. Sleep mode is
the ideal setting when going to bed. In this mode the temperature will increase 1°C every one or
two hours. This slow change of temperature will make you sleep more comfortably and in
addition to that the machine will operate a lot more efciently which leads to both energy saving
costs and a more quiet experience.
Sleep Mode
12
Push the “TIMER” button to enter the Timer Mode. The icon at the bottom of the remote control
display will start ashing, to indicate that Timer mode has been entered. Press the up/down
buttons to set the timer. Push the “TIMER” button again to conrm.
Timer Mode
When the remote control enters the Timer Mode, there will be no indication on the Air
Conditioner. After the timer settings have been conrmed, only then will the “TIMER” indicator
light on the Air Conditioner turn orange and the set time on the main display will ash for 10
seconds and then return back to normal mode.
To turn off the timer, push the “TIMER” button, dial the time back to “00” and press “TIMER” to
conrm.
°C/°F Switch
Push this button to switch the temperature display mode between Celsius and Fahrenheit.
Buttons
Push these up/down buttons to increase and decrease the temperature/timer.
LED Wake Up
Push this button to wake up the remote control display.