ADC AD-50 - Specifications

113066 -17 www.adclaundry.com 7
MAXIMUM CAPACITY (DRY WEIGHT) 50 lb
22.68 kg
TUMBLER DIAMETER 32 3/4”
83.19 cm
TUMBLER DEPTH 37 1/2”
95.25 cm
TUMBLER VOLUME 18.30 cu ft
518.20 L
TUMBLER/DRIVE MOTOR 3/4 hp
0.56 kW
BLOWER/FAN MOTOR N / A
DOOR OPENING (DIAMETER) 21 1/2”
54.61 cm
DOOR SILL HEIGHT N / A
WATER CONNECTION 3/4”-11.5 NH
DRYERS PER 20’/40’ CONTAINER 10 / 20
DRYERS PER 48’/53’ TRUCK 26 / 28
VOLTAGE AVAILABLE 120-460V 1,3ø 2,3w 60 Hz
APPROXIMATE NET WEIGHT 635 lb
288.03 kg
APPROXIMATE SHIPPING WEIGHT 680 lb
308.44 kg
AIRFLOW
60 Hz
600 cfm
16.99 cmm
HEAT INPUT 150,000 Btu/hr
37,799 kcal/hr
EXHAUST CONNECTION (DIAMETER) 8 ”
20.32 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
INLET PIPE CONNECTION 1/2” M.N.P.T.
VOLTAGE AVAILABLE 208-480V 3ø 3w 60 Hz
APPROXIMATE NET WEIGHT
N / A
APPROXIMATE SHIPPING WEIGHT
AIRFLOW
60 Hz
EXHAUST CONNECTION (DIAMETER)
COMPRESSED AIR CONNECTION
COMPRESSED AIR VOLUME
OVEN SIZE
kW Btu/hr
kcal/hr
24 81,900
20,638
30 102,390
25,802
VOLTAGE AVAILABLE 120-460V 1,3ø 2,3w 60 Hz
APPROXIMATE NET WEIGHT 667 lb
302.55 kg
APPROXIMATE SHIPPING WEIGHT 710 lb
322.05 kg
AIRFLOW
60 Hz
600 cfm
16.99 cmm
STEAM CONSUMPTION 1 4 2 lb /hr
64.41 kg/hr
OPERATING STEAM PRESSURE 125 psi max
8.62 bar
EXHAUST CONNECTION (DIAMETER) 8 ”
20.32 cm
COMPRESSED AIR CONNECTION 1/8” F.N.P.T.
COMPRESSED AIR VOLUME 0.75 cfh
0.02 cmh
BOILER HORSEPOWER (NORMAL LOAD) 4.1 Bhp
SUPPLY CONNECTION 1” F.N.P.T.
RETURN CONNECTION 1 ” F.N.P.T.
SECTION II
SPECIFICATIONS
A. SPECIFICATIONS
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
GAS
Shaded areas are stated in metric equivalents 2/24/22
ELECTRICSTEAM