68
Weather Station with Wireless Outdoor Sensor WS 1502/1503
The temperature range can be selected by the user. In
order to adjust the upper and lower temperature limits:
1. Hold down ALERT for a few seconds until the digit next
to “Hi” blinks.
2. Using the + and - buttons, adjust the upper
temperature limit.
3. Press ALERT in order to save the entry.
4. Using the + and - buttons, adjust the lower
temperature limit.
5. Finally, press ALERT.
To switch the function off again, press ALERT as often as
needed until the symbol for the temperature range goes out.
Alarm
Setting the alarm time
1. Press ALARM once.
The alarm symbol is shown on the display.
2. Hold down ALARM for a few seconds until the alarm
hour indicator blinks.
3. Using the + and - buttons, set the desired alarm hour.
4. Press ALARM.
The minute indicator for the alarm time blinks on the
display.
5. Using the + and - buttons, set the desired alarm minute.
6. Finally, press ALARM to save the settings.
FW Station.indb 68 21.09.2015 09:46:00
To Next Page
Loading...
Need help?
General
