70
Weather Station with Wireless Outdoor Sensor WS 1502/1503
Other functions
Display light
Battery operation
− Press the SNOOZE/LIGHT button to switch on
the display light of the base station for approx.
15seconds.
Mains operation
If you operate the base station using the mains adaptor
over the mains supply, the display is permanently lit.
− Repeatedly press the SNOOZE/LIGHT button in order
to choose the dierent brightness levels: Full light >
low light > o.
Reset
If obviously false values are being shown on the display of
the base station, you should reset the base station to the
delivery state.
1. Insert a thin object, e.g. an unfolded paperclip, into the
RESET opening on the rear side of the base station.
2. Press with a little force against the resistance.
After a short time, all indicators on the display will
fade in for a brief moment. Furthermore, the display is
briefly lit up and a beep sounds.
FW Station.indb 70 21.09.2015 09:46:00
To Next Page
Loading...
