72
Weather Station with Wireless Outdoor Sensor WS 1502/1503
Fault/Remedy
Fault Possible Cause
The DCF77 signal for the
time cannot be received.
Check the chosen
location.
Start the signal
reception manually, if
necessary.
Adjust the time
manually.
The temperature
information of the sensor
seems too high.
Check whether the
sensor has been
exposed to direct
sunlight.
Instead of showing the
measured values for
temperature or humidity,
the display shows H.HH or
LL.L.
The values lie
above or below the
measurement range.
The temperature indicator
is blinking on the display.
The temperature alert
has triggered. Press
on ALERT as often
as needed until the
blinking stops.
The indicator is illegible, the
function is unclear, or the
values are obviously false.
Reset the weather
station to the original
delivery state.
FW Station.indb 72 21.09.2015 09:46:00
To Next Page
Loading...
Need help?
General
