69
Weather station with wireless outdoor sensor WS 2302
English
Temperature and humidity alarm
You can set the upper and lower limits for outdoor tem-
perature readings (default setting: -40 °C to 70 °C).
When the upper limit is exceeded,
is displayed;
when the lower limit is not reached,
is displayed. In
addition, the device emits beeps.
Set temperature limits
1. Press the button repeatedly until and a tem-
perature value (default setting: 70 °C) are displayed at
the bottom left of the display.
2. Press and hold the
button until and the pre-
viously displayed temperature value (default setting:
70 °C) start flashing.
When using multiple wireless sensors: press CH
to select another channel and thus also sensor.
Channel “1” is always used by default.
3. Use the button + or - to set the desired upper limit.
4. Press
.
flashes on the display.
5. Use the button + or - to set the desired lower limit.
6. Finally, press
.
To Next Page
Loading...
