ADE WS 2302 - Troubleshooting Common Issues; DCF77 Signal Reception Problems; High Outdoor Temperature Reading Issues; Display Value Error Resolution

76
Weather station with wireless outdoor sensor WS 2302
Fault/Remedy
Fault Possible cause
DCF77 signal for the time
is not received.
 Check the selected
location.
 If necessary, start
the radio reception
manually.
 Set the time manually.
Temperature indication
for the outdoor sensor
appears too high.
 Check whether the
sensor is exposed to
direct sunlight.
The display shows “H.HH”
or “LL.L” instead of the
measured values.
 The values lie above
or below the meas
-
urement range.
Display is illegible, func
-
tion is unclear or values
are obviously incorrect.
Reset the weather station
to the delivery state.
1. Remove the batteries
from the outdoor
sensor and the base
station.
2. Wait a moment.
3. Proceed as described
in “Start-up”.