ADEEPT RaspClaws - Integrate Motor HAT and Sensors

www.adeept.com
15
3.2. Servo debugging.
1. Fix four M2.5x10+6 Copper Standoffs on Raspberry Pi.
insert the Adeept Motor HAT into Raspberry Pi.
Assemble the following components
Raspberry Pi x1
M2.5x4 Screw
x4
Adeept Motor
HAT x1
M2.5x10+6 Copper
Standoff x4
M2.5x14 Copper
Standoff x4
Effect diagram after assembling