ADEEPT Robotic Arm - User Manual

1

Summary

Lesson 6: Assembling the Robotic Arm

Base Assembly and Component Mounting

Battery Installation and Circuit Connection

Lesson 7: GUI Application Control

Python and pySerial Setup for GUI

Using the GUI for Arm Control

Instructions on opening and controlling the arm via the GUI application using sliders.

Lesson 8: GwBlock Graphical Control

GwBlock Prerequisites and Connection

Graphical Programming with GwBlock

Guides on using GwBlock graphical programming to control the robotic arm's movements.

Lesson 9: Potentiometer Control Mode

Uploading Potentiometer Control Code

Controlling Arm Movement with Potentiometers

Explains how each potentiometer maps to specific servo movements and their ranges.

Lesson 10: Learning Mode

Uploading and Operating Learning Mode

Guides on uploading code and operating the learning mode for recording actions.

Lesson 11: Processing Controls Robotic Arm

Processing Software Setup

Controlling Arm via Processing (Keyboard;Mouse)

Guides on running Processing sketches to control the arm via keyboard or mouse input.

Lesson 12: Imitation Function (Pen)

Preparing and Uploading for Imitation Mode

Operating the Imitation Mode

Details how to enter and operate the robot arm's imitation mode for recording actions.

Lesson 13: Writing and Drawing Control

Uploading and Running Drawing Control Program

Guides on uploading Arduino sketch and running Processing for drawing control.

ADEEPT Robotic Arm Specifications

General

Brand	ADEEPT
Model	Robotic Arm
Category	Robotics
Language	English