3.5. Run the AWR
Start
Switch on the car.
After a while, if the LEDs turn red, it means the car’s server is connected to a Wi-Fi waiting for
the PC client to join.
If there is no Wi-Fi for the car to connect with, the LEDs turn blue, it means the car has set up
an AP-Hotspot, you can use your PC to search it, the RPi Car’s AP-Hotspot’s SSID name is
AdeeptCar and password is 12345678.
Then implement operations in Windows.
Double click to run the file client.py in the folder client.
For initial running, you need to enter the IP address of the Raspberry Pi car IP Address, then
click Connect, and the program will connect to the Raspberry Pi.
After connection, the program will save the IP address. For the next use, if the IP address of
the Raspberry Pi has not changed, you may press Enter directly next time to connect.
To Next Page
Loading...
