28
REMOTE CONTROL GUIDELINES
WIRELESS SETUP
There are many factors that can affect and/or interrupt a wireless signal, including walls, glass, met-
al, objects, and people. Therefore, the following guidelines are recommended in order to maximize
the chances of having a clear path for the wireless signal to reach the device:
• Install the device a minimum of 9.8 ft (3m) above audiences and/or ground level.
• Arrange the wireless antenna in an upright, vertical position.
• Position devices in direct line of sight of the transmitting controller.
Careful planning and testing of the selected installation location is critical in order to ensure opti-
mized, reliable wireless operation.
REMOTE USAGE
This device can be operated wirelessly using the ADJ UC IR remote unit. In order to control the
device, the IR Remote setting in the system menu’s Personality sub-menu must be set to the “On”
configuration, and the handheld remote must be aimed at the front of the fixture. Maximum effective
range is 30 feet (9 meters).
Please note that the unit can only be controlled when it has been set to Primary mode. The
unit will NOT respond to commands when it has been set to Secondary mode.
To Next Page
Loading...
