ADJ Products, LLC - www.adj.com - Element QA User Manual Page 26
ADJ Products, LLC - www.adj.com - Element QA User Manual Page 27
Element QA Operating Instructions
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together.
The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either “AFXX”,
“AJXX”, or “A-JF” is displayed.
• AFXX = Color Fade mode, there are 16 Color Fade modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 16 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET
UP button until “SP.XX” is displayed. When this is displayed you
can adjust the running speed of your desired program. Use the
UP or DOWN button to adjust the speed between “SP.01” (slow-
est) and “SP.16” (fastest). Once you have set your desired running
speed, press the SET UP button to return to your desired Auto
Run Mode.
Element QA Operating Instructions
RGBA Dimmer Mode:
1. Plug the fixture in and press the MODE button “r: XXX” is dis-
played. You now are in Red dimming mode. Press the UP and
DOWN buttons to adjust intensity. After you have finished adjust-
ing the intensity, or if you would like to skip to the next color,
press the SET UP button.
2. When “G: XXX” is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
3. When “b: XXX” is displayed you are in Blue dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When “A: XXX” (Amber) is displayed you are in Amber dimming
mode. Press the UP and DOWN buttons to adjust intensity.
5. After you have adjusted the colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the strobe mode.
6. “FS: XX” will be displayed, this is strobe mode. The strobe
can be adjusted between “00” (flash off) to “15” (fastest flash).
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLXX” is dis-
played.
2. There are 64 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP
button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
To Next Page
Loading...
